Car Garage Flooring
Specialist garage flooring contractors installing heavy-duty epoxy and polyurethane resin floors in MOT bays, workshops and car dealership service centres across the UK.
For tendering enquiries, please email info@angliadecor.co.uk
Why Epoxy and Polyurethane for Car Garages
Car garage flooring takes a daily beating. Engine oil, brake fluid, diesel, hydraulic fluid, battery acid, tyre scuffing - it all ends up on the concrete. Left untreated, that concrete soaks it in and starts breaking apart. Cracks form, the surface dusts, and before long the floor becomes a slip hazard and an eyesore that puts customers off.
A high-build epoxy system applied at 300 microns minimum bonds directly to the prepared concrete and creates a sealed, non-porous surface. It handles the compressive loads from vehicle traffic, resists the chemical exposure that comes with daily mechanical work, and wipes clean without staining. For workshops where fork trucks or heavier plant operate alongside cars, a polyurethane flooring system adds greater flexibility and impact resistance without losing chemical protection.
Textured aggregate finishes are standard on garage floors - they keep grip levels up even when the surface is wet with water, oil, or degreaser. Anglia Decor also lays colour-coded zones and safety line markings directly into the floor finish, marking out pedestrian walkways, parking bays, and equipment zones so the workshop stays organised and compliant.
Our Process: Site Survey to Completion
Every job starts with a site survey. Anglia Decor's team checks the substrate condition, measures moisture levels, and looks at how the space is used - vehicle types, traffic volume, chemical exposure, wash-down areas - before putting a specification together. That survey is what separates a floor that lasts from one that peels inside twelve months.
Surface preparation is where most of the work sits. Diamond grinding or shot blasting strips back the old surface, opens the pore structure of the concrete, and gives the resin something to grip onto. Skip that step or rush it and the coating fails - it is as straightforward as that. Once the substrate is ready, the resin flooring system goes down in controlled coats, each one curing before the next is applied.
Anglia Decor has fitted oil-resistant resin floors in car garages, MOT bays, and workshop facilities for over 15 years. MOT bay installations include integrated test lane markings, pit edge markings, and equipment positions laid out to DVSA facility requirements for Class 4 and Class 7 testing. For dealerships that want a showroom-quality finish in the service area, high-gloss options are available too. A typical 300 m2 workshop floor takes 2 to 3 days from preparation through to final coat, and the team schedules work over weekends or out-of-hours so the business keeps running.
How It Works
Our straightforward process ensures you get the right solution with minimum hassle
Site Survey & Assessment
We visit your workshop to assess concrete condition and specific requirements.
Specification & Planning
Specify epoxy or polyurethane thickness and provide clear pricing with timeline.
Surface Preparation
Diamond grinding to remove stains and open pores for maximum adhesion.
Coating Application & Finishing
Professional installation with anti-slip finish and DVSA markings if required.
For tendering enquiries, please email info@angliadecor.co.uk
Why Businesses Trust Anglia Decor for Car Garage Flooring
Trusted by businesses across the UK for expert, reliable service
Garage Flooring Specialists
Over 15 years fitting resin floors in automotive environments, from independent garages to multi-franchise dealerships.
Specialist Workshop Knowledge
We understand the demands: oil exposure, chemical spills, heavy jack loads, and constant vehicle traffic. The specification reflects that.
Large-Scale & Complex Projects
Full facility refurbishments, multi-bay workshops, and phased rollouts across operational sites.
Minimal Disruption
Weekend and after-hours installation available so your workshop stays open for business during the week.
Workshop Safety & Compliance
Anti-slip finishes, line markings, and specifications that meet health and safety standards for automotive service centres.
Reliable & Straightforward
Transparent pricing, clear timelines, and a dedicated project manager on every job.
Case Studies
Real projects delivered by Anglia Decor. See the work we've completed for businesses like yours.
Trusted by leading brands
Frequently Asked Questions
What is the best flooring for a car workshop?
High-build epoxy resin at 300 microns or above is the go-to spec for vehicle workshops. It handles engine oil, brake fluid, diesel, and tyre marks without breaking down, and the surface wipes clean at the end of each day.
Does garage flooring resist oil and fuel?
Yes. Epoxy and polyurethane coatings seal the concrete so oil, fuel, hydraulic fluid, and battery acid cannot penetrate. Spills sit on the surface - you wipe them up and there is no stain left behind.
Can you install flooring for MOT bays?
Anglia Decor fits resin floors with integrated test lane markings, pit edge markings, and equipment positions for Class 4 and Class 7 MOT bays, all laid out to meet DVSA facility requirements.
How long does garage flooring installation take?
A 300 m2 workshop typically takes 2 to 3 days, including surface prep and coating. Work gets scheduled over weekends or during closures so your booking diary is not affected.
Is garage flooring anti-slip?
Every garage floor Anglia Decor installs includes textured aggregate finishes that hold grip on wet and contaminated surfaces - around vehicle lifts, inspection pits, and wash-down areas where water and chemicals are part of daily operations.
Ready to Start Your Car Garage Flooring Project?
Our car garage flooring specialists will assess your facility and provide a tailored solution with minimal downtime.